- Home >
- Cordiale Netherlands Slate
Registration
Profile Informations
Login Datas
or login
Equivalent of just £3.65 per tile. The Cordiale range is a fine ribbed tile that is extremely durable, and goes well in busy offices, schools and other commercial buildings. With a nylon & polypropylene mix of fibres pile that will not flatten easily, so optimum performance will last for years to come. Permanently antistatic, and suitable where castor chairs are present. 10 year guarantee as standard for your peace of mind.
• Pile yarn description - 85% polypropylene, 15% nylon
• Tile size - 50cm x 50cm
• Total height - 7.8mm
• Total weight - 4.2 kgs/m2
• Pile weight - 950 g/m2
• Backing - Bitumen composite, 70% recycled
• Flammability - Euroclass Bfl-s1
• Castor rating - BS EN 985 pass rating. Suitable for continuous use
• Static loading - BS 4939:1987 (2003). Recovery greater than 80% (24 hrs)
• Dynamic loading - BS ISO 2094:1999 (2005). Loss less than 20% (1000 impacts)
• Static - BS ISO 6356:2000. Body voltage: pass under 2kv.
• Colour fastness to light - BS EN ISO 105 - B02 , Minimum grade: 6
• Colour fastness to shampoo - BS 1006:UK-TB: 1990, Minimum grade: 4
• Usage - heavy contract
• Guarantee - 10 year guarantee
We like to keep delivery as simple as possible. So the delivery cost is simply £20 +VAT. Or if you order 25m2 or more of flooring we will have this delivered to you for free. This is to 95% of the UK. If you are in the Scottish Highlands or offshore islands get in touch 1st so we can give you a delivery cost.
Delivery on this carpet tiles takes approx 3 working days. If you require a faster delivery service or any other delivery arrangement please get in touch with us so we can help you.
There must be someone to sign for the delivery. The day after you place the order we will email you the delivery date, and also pass your contact number onto the courier in case of any problems.
Things to note before you start:
You should start by laying from the centre of the room and not the edges. To obtain the centre point of the room measure the distance between both sets of walls facing each other. Join the centre of each wall with a chalk line. This will mark the centre af the room as shown in the image below. Just check this doesn't leave you with a small strip to fill at the edge of the room - if it does then just move your centre point a little.
If using a tackifier adhesive apply using a brush or roller, then allow to dry for approx 30 minutes to a tacky film. If using a spray adhesive, apply as you go along spraying the floor surface and waiting approx 1 min for the vapours to evaporate. For an even stronger bond spray both the sub floor and the bitumen backing. Commence laying the tiles from the centre point of the room working outwards towards the walls. Press down firmly as you go along to ensure a good firm bond, and that the tiles are fit tightly against each other, but not so tight to cause peaks in the new flooring.
Fitting against the walls
To get a perfect fit against the walls follow these steps:
Step 1. Lift the last uncut tile (marked "A" in the image below) and replace it with the tile that will be cut (tile "B" in the image below)
Step 2. Position tile "A" firmly against the room wall on top of tile B. Using tile A as a template cut through tile B.
Step 3. Then finally place tile "A" (the full tile) in its original position, and fit tile you have cut against the wall. Reapeat this step all around the edges of the room.
